•  09 396 20 00  IEDERE WERKDAG VAN 7u TOT 17u 
  •   LAAGSTE PRIJSGARANTIE
  •   ONMIDDELLIJK LEVERBAAR
  •   E-MAIL SUPPORT

FT.13003.01 EN ISOVIT E-CORK

294 weergaven
0 Vind-ik-leuks
0 0
ISOVIT E-CORK is a fixing and surface levelling mortar, formulated from mixed binders, cork aggregates and Natural Hydraulic Lime.

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

3. TECHNICAL DATA SHEET ISOVIT E - CORK NHL FIXING AND LEVELLING MORTAR WITH NATURAL CORK A G GREGA TE S d) Restri ctions ISOVIT E - CORK should not be applied at room and substrate temperatures below 5 ºC and above 30 ºC. Panel ap plica tion should be carried out a way from direct sunlight , strong wind and high temperatur e action . Facade panels have to be prote cted on top with finishing s olu tion s that effectively protect the applied materials from the water inlet . e) Complementary Advices Do not use ISOVIT E - CORK for filling joints between thermal insulation panels . The mixing water must be free of any impurities (clays, organic matter , etc.), and drinking water should be preferably used . No mortar that has initiated the setting process should be applied. Do not soften mortars by adding water after preparation . Do not add any other products to the mortar. ISOVIT E - CORK should be applied as it is shown in its original packaging . Do not ap pl y under temperatur e s above 30 ºC o r below 5 ºC. Do not apply on horizontal surfaces or with a tilt of less than 45º. Protect the top edges of the coating from rainwater . 5. PACKAGING AND VALIDITY Packaging 20 kg paper bags in plasticized pallets of 60 bags . Valid ity 12 months provided the conditions of the original packaging remain unaltered and in good storage conditions, protected from extreme temperature and humidity .

1. TECHNICAL DATA SHEET ISOVIT E - CORK NHL FIXING AND LEVELLING MORTAR WITH NATURAL CORK A G GREGA TE S 1. DESCRIPTION ISOVIT E - CORK is a fixing and surface levelling mortar , formula ted from mixed binders , cork a g grega te s and Natural Hydra ulic Lime . 2. FIELD OF USE ISOVIT E - CORK is specially designed for surface fixing and levelling , promo ting the increase of t h ermal and acoustic performance o f dark expande d a g glomera te d c ork panels (ICB) in thermal insulation systems on the exterior , n amely ISOVIT CORK , on masonry substrate s, cement bl ock , ICB panels and /o r hydraulic base substrate s, such as concrete and renders . ISOVIT E - CORK is suitable for the renovation of the thermal insulation of painted or ceramic coated facades, since it allows the fix ing of external insulation systems directly o n this type of substrate s with the addition of mechanical fixings – ISOVIT Bucha . For non - current uses or on particular substrate s, we advise you to contact our Technical - Commercial Services . 3. PRODUCT CHARACTERISTICS Powdered product Val ue Standard Co lou r Be i ge - Granulometry < 1 ,0 mm - Paste product Val ue Standard Mixing water 30 ,0 % ± 1,0 % - Theoretical consumption 3,5 kg/ m 2 – Fix ing 1,1 kg/m 2 /mm – Regulariza tion - Hardened Product Val ue Standard Compressive strength ≥ 6,0 MPa EN 1015 - 1 1 Flexural strength ≥ 2 ,5 MPa EN 1015 - 11 Adhesion to brick and block/ Mode of fracture ≥ 0,4 MPa/ A and B EN 1015 - 12 Adhesion to the insulation panel ( black cork agglomerate , ICB) ≥ 0,1 MPa Break within the insulation - Density 10 5 0 ± 150 kg/m 3 EN 1015 - 10 Capil l ari ty Class W2 EN 1015 - 18 Permeability to vapour ≤ 10 μ EN 1015 - 19 Reaction to fire Class A1 EN 998 - 1 Thermal Conductivity (λ 10, dry ) 0,33 W/m. o C (P=50 %) NP EN 1745

4. TECHNICAL DATA SHEET ISOVIT E - CORK NHL FIXING AND LEVELLING MORTAR WITH NATURAL CORK A G GREGA TE S 6. HEALTH AND SAFETY ( DOES NOT REPLACE CONSULTATION OF THE PRODUCT SAFETY DATA SHEET )  Irritating to eyes, respiratory system and skin;  May cause sensitization in contact with skin;  Do not breathe dust;  Avoid contact with skin and eyes;  If it comes in contact with eyes, rinse immediately and thoroughly with water and seek a specialist advice;  Use protective clothing and appropri ate gloves;  Keep out of children’s reach . 1 2 ISOVIT E - CORK EN 998 - 1 Lightweight (LW) industrial mortar for fix ing of thermal i n s ulation panels Declaration of performance DOP. 13 003 Being the conditions of applying our products out of our reach we do not take responsibility for its misuse. It is the customer’s duty to verify the suitability of the product for the intended purpose. In any case, our responsibility is limited to the value of the goods sup plied by us. The information contained in the pr esent data sheet may be altered without prior notice. In case of doubt and if you need any further advice please contact our Technical Services . Revis ion of M ar ch 2019 FT 1 3 00 3 .01 EN

2. TECHNICAL DATA SHEET ISOVIT E - CORK NHL FIXING AND LEVELLING MORTAR WITH NATURAL CORK A G GREGA TE S 4. AP P LICA TION a) Substrate preparation Substrate s should be hardened, free from dust, release agents, loose or u nstable materials, efflorescence, as well as from any type of material which affects normal adhesion conditions . Substrate s should be levelled , checking with a two - meter ruler that there are no irregularities greater than 1 cm. Otherwise substrate s should be levelled with REDUR H2FIBRA render . Pre - applied renders should have a "trowelled" texture and a cure of about 28 days, protected from bad weather . For applications on p a inted substrate s , there should be sufficient adhesion to withstand the new coating . If the substrate is an old ceramic coating, i t must be sturdy and levelled and all pieces must have good adhesion to the substrate . If this is not the case, remove the loose parts and level the coating . If necessary, wash the substrate with suitable detergents in order to r emove accumulated dirt and residues on the surface . b) Mixture preparation ISOVIT E - CORK should be prepared by mixing 5 , 5 to 6, 0 litre s of clean water (preferably drinkable) per bag of product, using an electric mixer, until a homogeneous paste is obtained . c) A p plica tion  Adhesion on masonry and uneven substrate s (unevenness not greater than 1 cm per 2 metres ) Fix the panels (dimens ion s 1,0 x 0,5 m) laying a discontinuous mortar string around the perimeter , adding at least two fix ing points in the middle of it . Provide for mechanical fixing with ISOVIT Bucha ( recommended minimum – 6 un/m²).  Adhesion on regular render or concrete surfaces Simple continuous fix ing should be carried out by using a 10 mm toothed trowel, preferably laying the mortar on the back of the panels. Provide for mechanical fixing with ISOVIT Bucha ( recommended minimum – 6 un/m²).  Fix ing recommendations Fix ing proce dures should ensure surface uniformity, levelling and non - spacing of the panels, without joint openings and ensuring that there is no mortar left in between .  Levelling Apply ISOVIT E - CORK mortar onto the su rface of the cork panels (ICB), conveniently arranged and adherent to the substrate s. Apply the first layer with a notched trowel and, immediately, embed a glass fibre mesh with characteristics appropriate to the application – ISOVIT Rede 160/343 . The second layer sh ould be applied over the first one to give the surfaces the flatness necessary to receive the final finish .

Weergaven

  • 294 Totale weergaven
  • 223 Websiteweergaven
  • 71 Ingesloten weergaven

Acties

  • 0 Social Shares
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 2

  • 4 www.biomat.be
  • 3 www.biomat.nl