•  09 396 20 00  IEDERE WERKDAG VAN 7u TOT 17u 
  •   LAAGSTE PRIJSGARANTIE
  •   ONMIDDELLIJK LEVERBAAR
  •   E-MAIL SUPPORT

FT.03004.01 EN REABILITA CAL AC Fino

131 weergaven
0 Vind-ik-leuks
0 0
REABILITA CAL AC FINO is a dry mortar, exclusively formulated from Natural Hydraulic Lime, intended for the execution of smooth finishes with an excellent permeability to vapour in renovation and rehabilitation solutions of old coatings. It incorporates fine siliceous and calcareous aggregates, carefully selected and additions, having particular properties of thixotropy, vapour permeability and durability particularly adapted to be used in coating rehabilitation systems.

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

1. 1 TE CHNICAL DATA SHEET REABILITA CAL AC FINO NATURAL HYDRAULIC LIME BREATHABLE SMOOTH F IN ISH 1. DESCRIPTION REABILITA CAL AC FINO is a dry mortar, exclusively formulated from Natural Hydraulic Lime, intended for the execution of smooth finishes with an excellent permeability to vapour in renovation and rehabilitation solutions of old coatings . I t i ncorpora tes f ine siliceous and calcareous aggregates , carefully selected and a d di tion s, having particular properties of thixotropy, vapour permeability and durability particularly adapted to be used in coating rehabilitation systems . 2. FIELD OF USE REA BILITA CAL AC FINO is used as a finish in the maintenance and rehabilitation of buildings , n amely when smooth finishes are wanted in the rehabilitation of old buildings’ inter nal or exter nal coatings that require high levels of water vapour permeability . The us e of the Natural Hydraulic Lime binder and its special composi tion results in an excellent physical - chemical behaviour and mechanical performance in connection with the diverse materials constituting this type of substrate s . REABILITA CAL AC FINO constitu tes the smooth finish of the rehabilitation scheme of REABILTA Cal range , produ cts that are exclusively formulated from Natural Hydraulic Lime . Since the re are specific situations in each rehabilitation work, our Technical Services should be consulted at the time of product selection . 3. PRODUCT CHARACTERISTICS Powdered product Val ue Aspe ct B e i ge powder Granulometry < 0,500 mm Paste product Val ue Mixing water 50,0 ± 1,0 % Theoretical consumption 0,75 kg/m2/mm Maximum thickness pe r layer 1 mm M aximum thickness 2 mm Waiting time between layers Around 4 ho urs Waiting time before p ainting 14 d ays Recommended waiting times refer to the application of the product under standard temperature and humidity conditions .

3. 3 TE CHNICAL DATA SHEET REABILITA CAL AC FINO NATURAL HYDRAULIC LIME BREATHABLE SMOOTH F IN ISH 5. PACKAGING AND VALIDITY Packag ing 25 kg paper bags in plasticized pallets of 48 bags . Valid ity 6 months provided the conditions of the original packaging remain unaltered and in good storage conditions, protected from extreme temperature and humidity . 6. HEALTH AND SAFETY ( DOES NOT REPLACE CONSULTATION OF THE PRODUCT SAFETY DATA SHEET )  Irritating to eyes, respiratory system and skin;  May cause sensitization in contact with skin;  Do not breathe dust;  Avoid contact with skin and eyes;  If it comes in contact with eyes, rinse immediatel y and thoroughly with water and seek a specialist advice;  Use protective clothing and appropriate gloves;  Keep out of children’s reach . Being the conditions of applying our products out of our reach we do not take responsibility for its misuse. It is the customer’s duty to verify the suitability of the product for the intended purpose. In any case, our responsibility is limited to the value of the goods sup plied by us. The information contained in the present data sheet may be altered without prior notice . In case of doubt and if you need any further advice please contact our Technical Services . Revis ion of Jan uary 2019 FT. 03004.01 EN

2. 2 TE CHNICAL DATA SHEET REABILITA CAL AC FINO NATURAL HYDRAULIC LIME BREATHABLE SMOOTH F IN ISH 4. A P PLICA TION a) Substrate prepa ration Substrate s prepared with REABILITA CAL AC mortar, t rowelled and hardened are ready to rece ive REABILITA CAL AC FINO . In cas e of direct a p plica tion on another type of re nder, these should be regular, cohesive, clean and without any type of material tha t affects the normal adhesion conditions . REABILITA CAL AC FINO should be ap pli ed on REABILITA CAL AC surfaces while still fres h , but sufficiently hardened to rece ive this kind of finish . b) Mortar preparation REABILITA CAL AC FINO should be mix ed with th e appropriate quanti ty of water (9,5 to 10,0 litre s p e r 20 kg bag ), in small quanti tie s and using an electric m ixer , so as to obtain a uniform and lump - free paste . c) A p plica tion A pply REABILITA CAL AC FINO with a metal trowel so as to obtain a smooth and h omog eneous film in order to fill all surface pore s of the mortar already ap pli ed . The second layer should be applied when the first one is hardened , followed by the n umber of coats ne eded to obtain a perfe ctly smooth texture, never exce e d ing a total thickn ess of 1 - 2 mm. Prior to the p aint application , let REABILITA CAL AC FINO dry for at least 14 d ays . The painting scheme to be carried out should be of silicate base or aqueous base with good water vapour permeability . d) Restri ction s REABILI TA CAL AC FINO should not be applied at room and substrate temperatures below 5 °C and above 30 °C. It has a curing period of 28 days . In hot and/or dry weather or when substrate s are directly exposed to sunlight , the substrate should be previously wetted and ap plication should only be started when it is dry . Under these conditions daily watering of the surfaces should be carried out, for one week, so as to keep renders permanently moist . Application in the presence of strong winds may cause render cracking. I n such case, walls should be protected so as to minimize the effects of wind action . e) Complementary Advices The mixing water should be free of any impurities (clays, organic matter) and drinking water should be preferably used ; No mortar that has exceede d its open time should be applied. Do not soften mortars by adding water after preparation . Do not add any other products to the mortar. REABILITA CAL AC FINO should be applied as it is shown in its original packaging .

Weergaven

  • 131 Totale weergaven
  • 99 Websiteweergaven
  • 32 Ingesloten weergaven

Acties

  • 0 Social Shares
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 2

  • 4 www.biomat.be
  • 3 www.biomat.nl